When you wish to remove your Halon 1301 system or other types of agents, Eg-Tek can safely and properly disconnect and remove your suppression system. In addition, some agents can be recycled for LEED’s point credits.

o ensure the effectiveness of your Clean Agent fire suppression system, the ‘integrity’ of the room to hold the gas is a critical factor. Room Integrity Testing is vital to ensure your protected area is properly sealed so your suppression agent won’t escape allowing the fire to possibly re-ignite.

When your existing space no longer meets your needs, Eg-Tek can modify your fire protection systems to meet you new requirements.

To accomplish this, Eg-Tek has aligned itself with the industry’s premier manufacturers of fire detection, alarm, and suppression systems.

When your system discharges, protecting you from a fire, restoring your system is of the highest priority. Eg-Tek stands ready with a fully functional U.L. Listed pumping station to guarantee quick response and restoration of your suppression system.

  • Eg-Tek maintains a variety of agent inventory to minimize down time.
  • Additionally, Recharge and reconditioning kits are stocked in inventory.

With over three and one half decades of fire system design experience and having installed over 15,000 systems, Eg-Tek’s design team is second to none. NICET Level IV Certified designers, in-house Professional Engineers (P.E.) along with ISO 9001-2000 Quality Standards, your company can be assured that your fire protection system meets all applicable codes and all of Eg-Tek’s internal quality control requirements. Protecting people, property and the environment is our mission in work and life.

Whether a failure is uncovered during an routine inspection, or a system problem presents itself, Eg-Tek is committed to respond in a timely manner. Eg-Tek’s field technicians are factory trained and certified to properly repair and maintenance your system to avoid future problems and future expenses.

  • Strategically located field technicians for emergency response.
  • Fully stocked service vans.
  • Technicians have instant access to past inspection and maintenance history.
  • 24 hours a day, 7 days a weeks… that’s our commitment.

Eg-Tek provides site & system specific training for new installations. In addition, Eg-Tek has the expertise to provide training for older equipment still in service. In the event that new personnel or refresher training is required, Eg-Tek technicians can provide that to you, at no charge, during routine inspections.

Training Topics may include:

  • Overview of system components.
  • Understanding of system application.
  • Sequence of operations.
  • Explanation and differentiation of warning or alarm indicators.
  • Resetting and/or aborting functions.
  • Routine trouble shooting techniques.
  • How to call for service.
  • System maintenance requirements.
  • Safety considerations and issues.
  • Recommendations for system improvement, if necessary.

Today, some of the largest and most successful companies in the world trust Eg-Tek to service and maintain their fire systems. Those same companies protect their most valuable assets and mission critical processes. In fact, over the past three and a half decades, Eg-Tek’s service team has and continues to provide unmatched performance when it comes to Testing, Inspecting and Maintenance of your fire systems.

  • Fire Alarm and Detection System
  • Fire Suppression Systems
  • Air Sampling
  • Fire Extinguishers
  • Sprinkler Systems
  • Emergency/Exit Lights
  • SCBA's (Self-Contained Breathing Apparatus)
  • Card Access Systems

The first thing you will notice about having a qualified well-trained Eg-Tek Technician in your facility is their knowledge of your fire system. Every technician goes through not only manufacturer training, but Eg-Tek's rigorous in-house training on fire systems, NetREPORT, fire codes, and so much more.

All Manufacturers and Types of Systems

  • Eg-Tek Technicians are cross-trained at Eg-Tek University to Test & Inspect your fire system no matter the Brand.
  • Whether it is Fire Alarm or more complex Clean Agent Fire Suppression System, our team of technicians can handle it.

Technical Experience where it counts

  • The average Eg-Tek Field Technician has over 8 years of field experience.
  • Technicians are Manufacturer-Trained, Licensed and Certified.
  • Each Eg-Tek Technician Test & Inspects to ISO-9001 Quality Standards to maintain consistent/accurate inspections.

Online Reporting

Continuing Eg-Tek’s reputation as a technology innovator, we were a very early adopter of offering online reporting by creating our own proprietary reporting software for our customers, NetSITE

  • Easy to access any report online.
  • Reduces your department record keeping workload.
  • Reports for any system, at any facility.
    • Inspection Reports
    • Invoices
    • Drawings
    • Owners Manuals
    • And other critical documents

Code Compliance

  • Eg-Tek University along with ISO-9001-2000 Quality Standards insures our field technicians are trained to meet local, state, and national fire codes.

Single Point of Contact

  • Eg-Tek has the capacity to manage all of your fire systems wherever they may be located through one service coordinator.
  • Consistency.
  • Work flow efficiencies. (Less coordination on your part.)
  • Significant time and money savings.

ISO 9001-2000 Quality Standards

  • In any operation, the quality of the work completed is significantly impacted by the skill of the individual performing the work. At Eg-Tek, all of our operations, from sales to design to project management to back-office to service, are structured to meet the newest ISO-9001 Quality Standards.

Eg-Tek offers fire alarm monitoring services to provide peace of mind to business owners who want a national team of monitors looking after life and property housed within the protected facility.  In addition to fire alarms, Eg-Tek provides monitoring of supervisory signals for sprinkler malfunction and trouble signals indicating electrical malfunction. Alarm signals immediately prompt a dispatch call to the local fire department while personnel from the protected property and the alarm dealer are notified of supervisory and trouble signals. Records are maintained of all signals received and the state-of-the-art systems are tested regularly, inspected and maintained by Eg-Tek.

Eg-Tek understands that when you have an emergency, time does not matter. Day or Night Eg-Tek Technicians are on call, ready to be dispatched to handle your current crisis, with trained, experienced technicians.

  • Strategically located field technicians for emergency response
  • Fully stocked service vans
  • Technicians have instant access to past inspection and maintenance history
  • 24 hours a day, 7 days a week… that’s our commitment


Main Menu

Fire Notification

Fire Notification Systems

Fire Notification Service

Fire Alarm Notification

Audiovisual Notification

Mass Notification

Exit Point Notification

Voice Evacuation Notification

Water Mist

Water Mist Fire Suppression

Marioff Hi Fog Fire Suppression

Micromist Fire Suppression

Water Mist Fire Protection

Explosion Suppression Systems

Explosion Protection

Industrial Explosion Protection

Explosion Suppression System Design

Codes and Standards

NFPA Links

NFPA 72 Updates